Products - RFID Products
Micropy RFID PAD
Highlights
  • Micropy RFID pad is a desktop RFID reader with a built-in antenna.
  • It is programmable using versatile Micro Python language. All the system resources such as Display, user buttons, serial ports and etc. are accessible through the python code,
  • It can be used standalone for programming RFID tags from a barcode, using an external serial barcode reader accessory.
  • The USB port on the device is used for communication (Emulating HID keyboard and CDC communication) and powering the device.
  • Available in both HF and UHF frequencies
Micropy RFID Readers
Highlights
  • Micropy readers are simple and afforable RFID readers
  • Small form factor without any compromise in usability
  • Programmable using versatile Micro python language
  • On host intelligence and programmability
  • The USB port on the device is used for communication (Emulating HID keyboard and CDC communication) and powering the device.
  • Available in both HF and UHF frequencies
Libs Security Gate
highlights
  • Available in single aisle and dual aisle configurations.
  • Flexible installation allows cascading to cover two side by side dual entry doorways.
  • People counter with both audio and visual indicators.
  • Customizable to fit library décor.
Reel to Reel Encoder
Highlights
  • Available in HF only, UHF only and dual HF and UHF.
  • Highly efficient for tesing and encoding HF and UHF tags.
  • Serialized encoding ensures that all RFID labels on a roll contain serialized data. The encoding format can be defined by the user or it can be chosen from a list of pre-programmed EPC compliant formats.
  • User has the option to mark and bypass or stop and replace defective tags without losing serialized data order.
  • Exchange data with back system through web services.
  • Powered by Intelletto RFID Readers.
  • Thermal transfer printing.
HF Reader Module
Highlights
  • Frequency 13.56 MHZ
  • Max Transmit Power: 200 mWatt
  • Multiple HF protocols, ISO15693, ISO14443A, Felica, NFC Type 2.
  • Multiple antenna connection port, header pins or RF UMC (U.FL) connector.
  • Approved Antennas: Desktop: ANTH100-xx , Embedded: ANTH2
  • Antenna Connector 1 Ultra Mi nature Coax
  • Antenna Connector 2 0.1" Header
  • Dimensions with shield 1.25"x1.25"x.28" (L.W.H)
  • Dimensions No Shield 1.00"x1.00"x.22" (L.W.H)
  • Communication UART(TTL)
  • Digital 4 GPIO
  • Operating Temp. -20C to 70C
  • Flexible operating voltage from 3.0 to 5.0 volts.
  • Supply +3.3v to +5v
  • Current Read &Write: 120mA, Idle: 6mA, Deep Sleep: 15uA, Sleep: 3mA
  • Compliance: FCC: X7X-MHF1, IC: 8859A-MHF1, RoHS
HF Desktop Antenna
Highlights
  • Frequency 13.56 MHZ
  • Max TX Power 1 Watt
  • VSWR Less Than 1.5
  • Cable Length 39 in (990 MM)
  • For use on non-metallic surfaces
  • Active area of the antenna exceeds antenna surface dimensions by 2 to 6 inches horizentally
  • Read Range up to 12 in (300mm) vertically
  • Surface Dimension 13in X 9.25in X 0.5in (336mm X 235mm X 12.7mm)
HF Embedded Antenna
Highlights
  • small form factor with UMC connector and optional RF cable.
Products - Connectivity Products
Serial to HID keyboard converter
Highlights
  • Converts RS232 serial to USB keyboard.
  • Optional USB power on pin 9 of RS232 end.
  • Available in Czech , English, French(France), French(Canada), German, Hungarian, Italian and Spanish keyboard emulations.
  • Eliminates the need to install any device driver or keyboard redirector software. Simply plug it in and any serial input will become a keyboard input
  • Draws power from USB port. No external power source required.
  • Extended Keyboard controls allows the serial device to control PC functions by sending upper ASCII characters into the serial end of the cable. For example sending a character 181 into the serial end of the cable, will invoke function key F1 on the HID keyboard end and so on.
  • Limited bidirectional capability allows the use of certain hotkey on host keyboard to send a command string to the RS232 device.
  • Cable Length 74in (1880 mm)
  • Certifications & Compliance: FCC, ICS, CE and RoHS.
Applications
  • Connects any serial device to any operating system as a Keyboard. It works on Windows and MAC OS, Linux and Android.
  • Converts RS232 port output characters of Scales, Barcode readers, RFID readers, Payment Terminal and etc. to keyboard strokes.
Serial Dual converter (USB/Wireless)
Highlights
  • In the absence of a wireless connection to SBK100 the data received at Serial (RS232) end will be routed to USB port by default.
  • Once a wireless connection is stablished, SBK100 will transfer the data from the serial end to the wireless connection .
  • HID keyboard and serial are available for wireless connectivity.
  • Optional USB power on pin 9 of RS232 end.
  • Eliminates the need to install any device driver or keyboard redirector software. Simply plug it in and any serial input will become a keyboard input.
  • Draws power from USB port. No external power source required.
  • Cable Length 12in (300 mm)
  • Certifications & Compliance: FCC, ICS, CE and RoHS.
Applications
  • Watch video demonstration to see how a combination of SBK100 products can be used to feed Allflex RS420 scanned tag data directly into the active application running on an iOS or Android device as keyboard input. This video demonstrates pairing of an Allflex RS420 Portable Stick with Intelletto's SBK100.
  • Connects any serial device to any desk top as a Keyboard through the USB port. It works on Windows and MAC OS, Linux and Android.
  • RS232 data output from Scales, Barcode readers, RFID readers, Payment Terminal and etc. can be scanned into application that run on iPhone®, iPad® and iPod® in HID keyboard profile and Android devices in both HID keyboard and SPP modes.
  • RS232 data output from Barcode readers can be scanned into Intelletto SR10B Smart Reader.
Serial to Bluetooth Converter
Highlights
  • Once a Bluetooth connection is stablished, SBK200 will transfer the data from the serial end to the Bluetooth connection.
  • Tactile button toggles soft keyboard on iOS devices.
  • Available in muliple profiles, SPP and HID keyboard.
  • Long battery life upto 240 hours.
  • Built in charger, charge with any usb port or adaptor.
  • Bluetooth connection, charging and low battery indicators.
  • Available in English, German and French keyboard emulations.
  • Certifications & Compliance: FCC, ICS, CE and RoHS.
Applications
  • RS232 data output from Scales, Barcode readers, RFID readers, Payment Terminal and etc. can be scanned into application that run on iPhone®, iPad® and iPod® in HID keyboard profile and Android devices in both HID keyboard and SPP modes.
Bluetooth keyboard Emulator
Highlights
  • Converts bluetooth SPP profile character stream to USB keyboard strokes.
  • Bluetooth keyboard emulator dongle is an instant cable and keyboard emulator software replacement because it doesn't require any driver or middleware software installation.
  • Available in Czech , English, French(France), French(Canada), German, Hungarian, Italian and Spanish keyboard emulations.
  • Certifications & Compliance: FCC, ICS, CE and RoHS.
Applications
  • Watch video demonstration to see how BK100 can be used to feed Allflex RS420 animal identification reader output directly into the active application running on a PC as keyboard input. This video demonstrates pairing of an Allflex RS420 Portable Stick Reader's Bluetooth SPP output with Intelletto's BK100.
  • Devices such as data collectors, distance and length measurement tools, thickness and temperature measurement tools, Bluetooth enabled barcode readers and RFID readers, can transfer data wirelessly to an active widget of a program running on a PC running on Windows and MAC OS, Linux and Android.
  • When used in combination with Intelletto Serial to Bluetooth Converter Products a serial connection can be stablished over the Bluetooth. In this configuration, Intelletto's BK100 will be connected to the USB port of the client PC. The client PC can run on Windows , MAC OS, Linux or Android. Any serial data received from Serial to Bluetooth Converter Products will be converted to keyboard strokes.
Ethernet to Serial & HID Keyboard Converter
Highlights
  • This converter enables network devices to connect to a local network through an Ethernet port and communicate with another remote host computer using keyboard emulation, COM port emulation or RS232.
  • The communication happens through UDP or TCP protocols. This device comes in two setups, with USB port or with USB port and a RS232 (DB9 connector) port.
  • The USB port can emulate a Keyboard or a COM port. The built in web server on this device allows setup through a browser.
  • Draws power from USB port. No external power source required.
  • Ability to select keyboard language through setup. Available languages are English , Czech , French(France), French(Canada), German, Hungarian, Italian, Japanese, Spanish and Swedish.
Serial (RS232) to USB Converter
Highlights
  • This converter converts RS232 to USB virtual com port. It uses Silicon Labs CP210x USB to UART bridge chipset and requires a driver for its operation.
  • Drivers are available for major operating systems.
Products - HF RFID Inlays and Labels
RFID Labels for Libraries - Libs Tags
highlights
  • Comprehensive range of RFID labels for Libraries.
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • IC & Inlay - NXP ICode SLIX - Aluminium antenna.
  • Data retention – Guaranteed for the Life Time of the Library Item (Standard Library environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Storage temperature - -15 °C to 50 °C / 5 °F to 122 °F – 50% +/-10 relative humidity non condensing.
  • Available with a variety of antenna inlays.
  • Available blank or printed and encoded using customers logo and barcode range.
  • Quality Multicolor logos printed at very little extra cost.
Product Descriptions
  • LibsTag100 for Books & Magazines, Size 50x50 mm(2x2 in), White Paper Face.
  • LibsTag200 for Books & Magazines, Size 50x81 mm(2x3.2 in), White Paper Face.
  • LibsTag300 for Audio CD’s, Size 44 mm (1.73 in) Round, White Paper Face.
  • LibsTag400 for CD & DVD, Size 116mm (4.57 in) Transparent Material.
Libs Digital Assets Tag
highlights
  • IC - NXP ICode SLIX
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Minimum 50 years at temperature < 55 °C or 131 °F
  • Storage temperature - -15 °C to 55 °C / 5 °F to 131 °F
  • Security means: EAS and AFI
  • Diemnsions: W: 36mm [1.42“] H: 29mm [1.14”] D: 10.5mm [0.41”]
Product Descriptions
  • TF100 tag is designed for valuable digital assets such as laptops, tablets, book readers, projectors and etc.
  • The functionality, size and the visibility of TF100 along with a properly tuned and functioning security gate will put potential thieves on notice that a secure means of detection is guarding the digital asset item.
  • The tag is designed to work with standard HF RFID security gates and desktop readers.
  • The tag works on both metallic and nonmetallic surfaces.
  • Intelletto provides number of tested adhesive packages for attaching the Digital Asset Tag to tablets and laptop computers.
I-Code SLI-X Dry Inlay 45mm Square
Part Number : INT5001
  • Chip : NXP/I-Code SLI X
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45.00x45.00mm 1.77x1.77inch
  • Pitch : 52.388mm 2.06 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for Libraries.
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Guaranteed for the Life Time of the Library Item (Standard Library environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
I-Code SLI-X Dry Inlay 45x76mm Rectangle
Part Number : INT5002
  • Chip : NXP/I-Code SLI X
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45x76mm 1.77x2.99inch
  • Pitch : 82.55mm 3.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for Libraries.
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Guaranteed for the Life Time of the Library Item (Standard Library environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
Dry Inlay I-Code SLI-X 38x22.5mm Rectangle
Part Number : INT5003
  • Chip : NXP/I-Code SLI X
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 38x22.5mm 1.496x0.886inch
  • Pitch : 29.17mm 1.148 in
  • Web Width : 60mm 2.362 in
Highlights
  • Used in a comprehensive range of RFID labels
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Guaranteed for the Life Time of the Item (Standard environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NTAG213 NFC Dry Inlay 21mm Round
Part Number : INT5004
  • Chip : NXP/NTAG213
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 21mm Round 0.827inch Round
  • Pitch : 31.75mm 1.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for NFC applications.
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 144 bytes Read & Write
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
I-Code SLI-X Dry Inlay 39mm Square
Part Number : INT5005
  • Chip : NXP/I-Code SLI X
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 39x39mm 1.535x1.535inch
  • Pitch : 59.50mm 2.342 in
  • Web Width : 60mm 2.126 in
Highlights
  • Used in a comprehensive range of RFID labels
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Guaranteed for the Life Time of the Item (Standard environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NTAG210 NFC Dry Inlay 20mm Round
Part Number : INT5006
  • Chip : NXP/NTAG210
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 20mm Round 0.787inch Round
  • Pitch : 31.75mm 1.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for NFC applications.
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 48 bytes Read & Write
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NTAG210 NFC Dry Inlay 45x76mm Rectangle
Part Number : INT5007
  • Chip : NXP/NTAG210
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45x76mm 1.77x2.99inch
  • Pitch : 82.55mm 3.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for NFC applications.
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 48 bytes Read & Write
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NTAG213 NFC Dry Inlay 20mm Round
Part Number : INT5008
  • Chip : NXP/NTAG213
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 20mm Round 0.787inch Round
  • Pitch : 31.75mm 1.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for NFC applications.
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 144 bytes Read & Write
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NTAG213 NFC Dry Inlay 45x76 Rectangle
Part Number : INT5009
  • Chip : NXP/NTAG213
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45x76mm 1.77x2.99inch
  • Pitch : 82.55mm 3.25 in
  • Web Width : 56.00mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for NFC applications.
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 144 bytes Read & Write
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
I-Code SLI-X Dry Inlay 35mm Round
Part Number : INT5010
  • Chip : NXP/I-Code SLI X
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 35mm Round 1.378inch Round
  • Pitch : 45mm 1.772 in
  • Web Width : 56mm 2.205 in
Highlights
  • Used in a comprehensive range of RFID labels for Libraries
  • Standards - ISO 18000-3, ISO 15693.
  • Frequency - HF13.56 MHz.
  • User Memory - 1024bit / 32 blocks.
  • Read/Write Cycle - 100,000.
  • Data retention – Guaranteed for the Life Time of the Library Item (Standard Library environmental condition is 20 Degrees Centigrade / 68 Degrees Fahrenheit – 50% relative humidity)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NXP/Mifare Ultralight C Dry Inlay 21mm Round
Part Number : INT5012
  • Chip : NXP/Mifare Ultralight C
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 21mm Round 0.827inch Round
  • Pitch : 31.75mm 1.25 in
  • Web Width : 56mm 2.205 in
Highlights
  • Used in Transit Ticketing
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 1536-bit total memory
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
NXP/Mifare Ultralight C 45x76mm Dry Inlay
Part Number : INT5013
  • Chip : NXP/Mifare Ultralight C
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45x76mm 1.77x2.99inch
  • Pitch : 82.55mm 3.25 in
  • Web Width : 56mm 2.205 in
Highlights
  • Used in Transit Ticketing
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 1536-bit total memory
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
Infineon/SLE66R35E7 45x76mm Dry Inlay
Part Number : INT5014
  • Chip : Infineon/SLE66R35E7
  • Base Material : Clear PET
  • Antenna Built : Aluminium Etched
  • Antenna Size : 45x76mm 1.77x2.99inch
  • Pitch : 82.55mm 3.25 in
  • Web Width : 56mm 2.205 in
Highlights
  • Used in Security and Access Control
  • Standards - ISO 14443A
  • Frequency - HF13.56 MHz.
  • User Memory - 1k Byte ( User 768 Byte , Admin 256 Byte)
  • Operating condition : -40c° ~ +70c° 20%~80% RH
  • Storage condition : +18c°~ +28c° 40%~60% RH (RECOMMENDED)
  • Shelf Life: Minimum 2 years from date of manufacture before conversion
Products - UHF RFID Inlays and Labels
Alien Squiggle REF-040 Reference Design
Dry Inlay
  • INT4001 - Alien Squiggle REF-040 Higgs 4 Clear PET
  • INT4002 - Alien Squiggle REF-040 Higgs 3 Clear PET
  • INT4003 - Alien Squiggle REF-040 Higgs 3 White PET
Wet Inlay
  • INT4001W - Alien Squiggle REF-040 Higgs 4 Clear Wet Inlay
  • INT4002W - Alien Squiggle REF-040 Higgs 3 Clear Wet Inlay
  • INT4003W - Alien Squiggle REF-040 Higgs 3 White Wet Inlay
Thermal Transfer Label
  • INT4001L - Alien Squiggle REF-040 Higgs 4 Label
  • INT4002L - Alien Squiggle REF-040 Higgs 3 Label
Impinj E41C Reference Design
Dry Inlay
  • INT4004 - Impinj E41C Monza 4D Clear PET
  • INT4006 - Impinj E41C Monza 4QT Clear PET
  • INT4007 - Impinj E41C Monza 4QT White PET
Wet Inlay
  • INT4004W - Impinj E41C Monza 4D Clear Wet Inlay
  • INT4006W - Impinj E41C Monza 4QT Clear Wet Inlay
  • INT4007W - Impinj E41C Monza 4QT White Wet Inlay
Thermal Transfer Label
  • INT4004L - Impinj E41C Monza 4D Label
  • INT4006L - Impinj E41C Monza 4QT Label
Impinj E61 Reference Design
Dry Inlay
  • INT4010 - Impinj E61 Monza R6 Clear PET
  • INT4013 - Impinj E61 Monza R6-P Clear PET
Wet Inlay
  • INT4010W - Impinj E61 Monza R6 Clear Wet Inlay
  • INT4013W - Impinj E61 Monza R6-P Clear Wet Inlay
Thermal Transfer Label
  • INT4010L - Impinj E61 Monza R6 Label
  • INT4013L - Impinj E61 Monza R6-P Label
Impinj E62 Reference Design
Dry Inlay
  • INT4005 - Impinj E62 Monza R6 Clear PET
  • INT4012 - Impinj E62 Monza R6-P Clear PET
  • INT4015 - Impinj E62 Monza R6 White PET
  • INT4016 - Impinj E62 Monza R6-P White PET
Wet Inlay
  • INT4005W - Impinj E62 Monza R6 Clear Wet Inlay
  • INT4012W - Impinj E62 Monza R6-P Clear Wet Inlay
  • INT4015W - Impinj E62 Monza R6 White Wet Inlay
  • INT4016W - Impinj E62 Monza R6-P White Wet Inlay
Thermal Transfer Label
  • INT4005L - Impinj E62 Monza R6 Label
  • INT4012L - Impinj E62 Monza R6-P Label
Impinj B62 Reference Design
Dry Inlay
  • INT4008 - Impinj B62 Monza R6 Clear PET
Wet Inlay
  • INT4008W - Impinj B62 Monza R6 Wet Inlay
Thermal Transfer Label
  • INT4008L - Impinj B62 Monza R6 Label
Impinj E68 Reference Design
Dry Inlay
  • INT4011 - Impinj E68 Monza R6 Clear PET
Wet Inlay
  • INT4011W - Impinj E68 Monza R6 Wet Inlay
Thermal Transfer Label
  • INT4011L - Impinj E68 Monza R6 Label
Perforated 4x6(in), 101.6x152.4(mm) UHF RFID Label
Perforated 4x6(in), 101.6x152.4(mm) UHF RFID Label
  • INT1006 - Alien Squiggle Higgs 4
  • INT1007 - Alien Squiggle Higgs 3
  • INT1008 - Impinj E41C Monza 4D
  • INT1009 - Impinj E41C Monza 4QT
  • INT1014 - Impinj E61 Monza R6
  • INT1015 - Impinj E61 Monza R6-P
Perforated 4x2(in), 101.6x50.8(mm) UHF RFID Label
Perforated 4x2(in), 101.6x50.8(mm) UHF RFID Label
  • INT1010 - Alien Squiggle Higgs 4
  • INT1011 - Alien Squiggle Higgs 3
  • INT1012 - Impinj E41C Monza 4D
  • INT1013 - Impinj E41C Monza 4QT
  • INT1016 - Impinj E61 Monza R6
  • INT1017 - Impinj E61 Monza R6-P
Products - RFID Services
UHF , HF and NFC RFID Labels
highlights
  • Comprehensive range of UHF RFID labels for Supply Chain.
  • Comprehensive range of HF RFID labels for Libraries.
  • NFC Labels Ideal for Most NFC applications
  • Available blank or printed and encoded with BW or color logo.
  • Defect free RFID tags, 100 percent tested and marked for bad tags.
Customizations
  • Providing End to End UHF , HF and NFC RFID Services.
  • HF Services available in ISO15693 , ISO14443 A/B & NFC Type 2
  • Customized inlay antenna and label design.
  • Encoding and serialization.
  • Complete Data Management including multiple encoding and serialization schemes per customer. Maintaining barcode ranges. Keeping track of start/Stop serialization ranges per customer release order.
  • Quality Multicolor logos printed at very little extra cost.