| Route |
Gives the ability to use both RFID and Barcode
at the same time without any changes to application software. |
| Read/Write |
Reads from barcode and writes into the RFID tag. |
| Compare |
Reads the content of the barcode and compares it with the
content of the RFID transponder. The operator is notified
of the verification result both visually and audibly.
|
| EAS |
RFID label is used within Loss Prevention Programs. MultiPort
Companion can be programmed to activate, deactivate security
bit. This functionality can be used in each user mode combined
with other actions. The operator is notified visually and
audibly of the changes to the security bit of the transponder.
|
| Formatting |
Optimal data formatting for both for RFID transponder data
and barcode data.
Formatting is done both during reading as well as transferring
the data to the PC. The operator is able to set the formatting
criteria via GUI interface and store it for each user mode. |
| FlexEngine |
Available on R40 model, allows remote configuration and
ultimate flexibility on data layer design through scripting
language or predefined Engines. |
| Model Number |
INT101-R10 |
INT101-R30 |
INT101-R40 |
| Frequency |
13.56MHZ |
| Tags |
ISO18000-3,Tagsys 320, Tagsys
370, ISO15693, ICODE SLI |
ISO15693, Tagit-HF, ICODE
SL1, ISO18000-3, Tagsys 320, Tagsys370, ISO15693, ICODE SLI
|
ISO15693, Tagit-HF, ICODE SL1,
ISO18000-3, Tagsys 320, Tagsys370, ISO15693, ICODE SLI |
| Data Layer Format |
ASCII, Binary, Decimal to Hex |
Flexible, FlexEngine Enabled |
| Read range |
4 to 6 inches |
| Antenna |
Internal |
| Real Time Clock |
Internal with backup battery |
| Memory |
512 KB Flash |
| Firmware |
Upgradeable via internal connector
and external serial port |
| User Signaling |
1X7SEG, 5XLEDs, Buzzer |
| Serial Port |
2xRS232 |
| Voltage |
7.5 DC / 15 w external power
supply |
| Operating temperature |
0 up to +40 centigrade |
| Storage temperature |
-15 up to +70 Centigrade |
| Color |
Black/Grey |
| Case material |
ABS |
| Dimension (L.W.H) |
6.75X6.25X1.63 Inches |
| Note |
Not Recommended
for New Implementation |
|
Pharmaceuticals 
Library 
Supply
Chain
